N6.A
Check the water source and the actual test
Groundwater can carry pollutants from leaking tanks, waste sites, failing septic systems, industrial operations or agricultural activity. Contamination may migrate beyond the parcel where it began. Clear, pleasant-tasting water is not proof that no harmful contaminant is present.
Federal public drinking-water standards don’t regulate a private well the way they regulate a public water system. Owners need their own testing and should check state and local requirements. EPA recommends testing private wells every year for total coliform bacteria, nitrates, total dissolved solids and pH, plus other tests based on local conditions.
A test only addresses the substances, locations and time covered by its sampling. A bacteria-only report says nothing conclusive about solvents or petroleum. Obtain relevant records, identify nearby potential sources and use a qualified laboratory and professional advice. Do not promise that boiling water removes chemical contamination.
Work the example
A private well passes a bacteria test next to a former industrial site. No solvent analysis was performed.
Does the result rule out solvent contamination?
Show answer and reasoning
No. The report did not test that question.
Testing must match the suspected substances and appropriate sampling plan.
Private wells: test yearly for coliform, nitrates, TDS and pH, plus any local concern.
Sources and full lesson context
- Federal sourceEPA, private-well testing and contamination sources
- Federal sourceCDC, private-well testing and public-system distinction
- Federal sourceEPA, underground tank definition, risks and federal exclusions
Last reviewed November 15, 2026.
N6.A
Follow contamination into the building
Vapor intrusion occurs when vapor-forming chemicals below ground migrate into an overlying building. Contaminated soil or groundwater can release vapors that enter through cracks, utility openings and other pathways. A former dry-cleaning or fuel use can matter even when no chemical container remains on site.
The source may be on a neighboring parcel. Property lines don’t stop a groundwater plume or soil gas. Indoor products can give off some of the same chemicals, so a professional has to sort out the sources instead of assuming every reading comes from below ground.
A paved surface, a remodeled interior or a municipal water connection doesn’t settle the vapor question. Review historical uses, investigation results and mitigation controls with an environmental professional. No visible staining doesn’t mean a property is environmentally clear.
Work the example
A building uses municipal water, but contaminated groundwater beneath it contains volatile solvents.
Can the groundwater still matter to occupants?
Show answer and reasoning
Yes. Vapors may enter the building through the subsurface pathway.
Not drinking the groundwater doesn’t eliminate every exposure route.
Vapor intrusion: contamination below ground can reach indoor air even with city water.
Sources and full lesson context
- Federal sourceEPA, vapor intrusion pathways
- Federal sourceEPA, Phase I and Phase II assessment and cleanup follow-up
Last reviewed November 15, 2026.